DESCRIPTION：
Item Type: Audio Baby Monitor
Material: ABS
Gross Weight: 352g / 12.4oz
Item No.: DBM 8
Color: White
Wireless Signal: 2.4GHz
Monitor Battery: built in lithium battery, 500mAh capacity (shipped with built in battery)
Plug Voltage: 100-240V
Material: ABS+ Electronic Components
Parent Unit Battery Model: lithium battery (included)
Parent Unit Battery Capacity: 500mAh 1A (The subunit does not contain batteries)
Sound Monitor Size: Approx. 10.5 x 7 x 5cm/4.1 x 2.8 x 2in(parent unit)
Sound Monitor Size: Approx. 10.5 x 7 x 5cm/4.1 x 2.8 x 2in (sub unit)
Package List: 2 x Sound Monitor, 2 x USB Cable, 1 x Plug, 1 x Manual
Main Features:
1. Noise Detection: When the noise in the baby room is below 40db for more than 20 seconds, voice will be enabled and the monitor will cancel the slight background noise, until the noise exceeds 40db, the monitor will wake up and it will let you know exactly when your baby makes any sound.
2. Two Way Intercom: 2.4GHz digital signal, built in microphone and speaker, you can talk to your baby from a distance without running back.
3. Wireless Point to Point Transmission: Digital signal transmission, stable without interference, digital signal encrypted transmission, good security.
4. Night Light: This audio baby monitor has a night light, which can be controlled remotely, making it more practical and convenient to use.
5. Long Battery Life: The built in lithium battery in the baby care device has a capacity of 500mAh, and the standby time is up to 20 hours, and the battery life is long.
How to use:
1. Insert the adapter into the power socket. Connect the small end of the USB power cable to the parent device of the DC port. The power LED indicator will turn red.
2. Long press the power on key for 2 seconds to open the parent unit. The power LED indicator will light up green to indicate.
3. Once both the baby unit and the parent unit are open. The parent unit will transmit the audio captured by the baby unit.
4. If there is no connection or you are out of range, the audio will be turned off and the parent unit will beep quickly after the failure to re establish the link. Move the parent unit closer to the baby unit until the link is re established.
5. Press and hold the power button to power off the parent device.
Note:
Do not expose the baby monitor to extreme cold, high temperature, humidity or direct sunlight.
Do not put the product near the heating source.
Do not expose the battery to excessive heat, bright sunlight or flame.
Do not immerse the parent unit and infant unit in water. Do not wash them under the tap.
Do not use cleaning sprays or liquid cleaners.
Never put the baby unit in the playpen. Do not cover the infant unit or parent unit with anything such as towels or blankets.
In order to prevent from being strangled by the power cord, please always keep the baby unit and power supply at least 1 meter, and do not use an extension cord.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Skip to content
